The Wrong Way
Note how the belt is blocked by the "bump" made by the threading of the buckle. This is damn near impossible to resolve when wearing dry gloves. It also leaves the excess webbing on the outside instead of tucked neatly on the inside.
The Right Way
The "bump" is on the underside allowing smooth straight threading of the webbing. It also positions any excess webbing on the side of the belt against you the diver, instead of flapping about in front of you.
How To Do It
The KEY is starting correctly. After that everything flows naturally...Step 1: Come in from the TOP of the buckle...not the bottom
Step 2: Go down and then back up thru the next slot
Step 3: Continue up and then back down thru the next slot
Step 4: Go all the way back to the beginning
Step 5: Come up on the "inside" of Step 1
